Services
We can offer a range of certification and inspection services:
Design assessments (PED modules B / G / H1)
Inspections (PED modules A2 / C2 / F / G)
Verification of quality systems (PED modules D / D1 / E / E1 / H / H1)
Material assessment (Manufacturers Material Certification / Particular Material Appraisals)
PED welder qualifications
Approval of welding procedures
Equipment Categorization:
The PED divides pressure equipment into different risk categories. The services that we can offer you depend on the risk category of your pressure device. There are different modules (conformity assessment procedures) for demonstrating compliance with the requirements of PED to enable you to apply the CE Mark. In joint consultation, we look at which module is most suitable, taking into account the type of pressure equipment, the production volume and your own quality system. If you have your own quality system, you can, depending on the module, perform certain assessments and inspections within the PED yourself under the supervision of ALFA MLtd .
The Transportable Pressure Equipment Directive (TPED) 2010/35/EU is a directive agreed upon in the European Union that defines the rules and procedures for commissioning and certifying transportable pressure equipment on the road (in accordance with ADR), by rail (RID) and by inland waterways (ADN). The Regulations concerning the International Carriage of Dangerous Goods by Rail and the Agreement Concerning the International Carriage of Dangerous Goods by Road have also been followed by the UK for the same reasons. Although, in 2020, as a result of Brexit, the regulations maintained the same framework for dangerous goods regulations in Great Britain but made necessary amendments to reflect the UKs departure from the EU.
Design assessments (PED modules B / G / H1)
Inspections (PED modules A2 / C2 / F / G)
Verification of quality systems (PED modules D / D1 / E / E1 / H / H1)
Material assessment (Manufacturers Material Certification / Particular Material Appraisals)
PED welder qualifications
Approval of welding procedures
Equipment Categorization:
The PED divides pressure equipment into different risk categories. The services that we can offer you depend on the risk category of your pressure device. There are different modules (conformity assessment procedures) for demonstrating compliance with the requirements of PED to enable you to apply the CE Mark. In joint consultation, we look at which module is most suitable, taking into account the type of pressure equipment, the production volume and your own quality system. If you have your own quality system, you can, depending on the module, perform certain assessments and inspections within the PED yourself under the supervision of ALFA MLtd .
The Transportable Pressure Equipment Directive (TPED) 2010/35/EU is a directive agreed upon in the European Union that defines the rules and procedures for commissioning and certifying transportable pressure equipment on the road (in accordance with ADR), by rail (RID) and by inland waterways (ADN). The Regulations concerning the International Carriage of Dangerous Goods by Rail and the Agreement Concerning the International Carriage of Dangerous Goods by Road have also been followed by the UK for the same reasons. Although, in 2020, as a result of Brexit, the regulations maintained the same framework for dangerous goods regulations in Great Britain but made necessary amendments to reflect the UKs departure from the EU.
Other Services
1-Toxicity of Combustion Gases Chapter 2: Combustion Products & Their Effects on Life Safety
2-Fire Safety in Buildings PU Europe FIRE SAFETY HANDBOOK
2-Fire Safety in Buildings PU Europe FIRE SAFETY HANDBOOK
Reference specification: IEC 61730-2: 2004 ANNEX B ed. 2012 and 2016 Tests planned for compliance with the fire requirement of photovoltaic panels:
Burner Test – Spread of flame test
Wood pile test – Burning brand test
Burner Test – Spread of flame test
Wood pile test – Burning brand test
3- Our business partner for issuing GMP certificates in accordance with the Annexes II, III and V to Regulation (EC) No. 1223/2009 of the Council on Cosmetic Products on ISO 22716 & GMP
follow www.isc-cert.com in this link: https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32021R2325#d1e680-8-1
follow www.isc-cert.com in this link: https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32021R2325#d1e680-8-1
